Halo MT Boost SDV Hub 32h XD Black
Description
Our MT series hubs are our flagship mountain bike hub range. The MT series encompass everything we feel hubs for mountain biking should offer.
Durability, modularity and light weights make the MT Series a simple choice.
Suited best to XC, trail and enduro bikes alike, the MT Supadrive hub offers a 120 point near instant engagement with the ability to withstand substantial torque loads, such as those found with wide range cassettes. With multiple World Championship titles across a range of disciplines the Supadrive system is tried and tested to the very highest level and is our most advanced and reliable drive system to date.
Wide spoke flanges, sealed cartridge bearings and a Cr-Mo tube axle in the MT Supadrive hub ensure longevity.
Designed to be run with mountain bike gearing, the MT Supadrive hub features an XD driver or alternatively a MTB width HG freehub
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKWH-DAS1AAStock Code:CKWH-DAB1AAStock Code:CKWH-DAB2AAStock Code:CKWH-DAR1AAStock Code:CKWH-DAP1AAStock Code:CKWH-DAT2AAStock Code:CKWH-DAS1BAStock Code:CKWH-DAT2BAStock Code:CKWH-DAB2BAStock Code:CKWH-DAP1BAStock Code:CKWH-DAB1BAStock Code:CKWH-DAB1CAStock Code:CKWH-DAR1CAStock Code:CKWH-DAT2CAStock Code:CKWH-DAS1CA
R45 Centerlock™ hubs combine a lightweight hub body, our legendary made-in-house bearings, and now *Centerlock compatibility to harness the power of disc brakes. The result is the undeniable combination of the control of disc brakes, the fast rolling speed of our bearings.
- Engineered, manufactured and assembled in Portland, Oregon USA
- Legendary made-in-house bearings
- 5-year built-to-last warranty
- Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options.
- Easily serviceable and completely re-buildable with our R45 Hub Service Tool
- Ceramic bearing upgrade available
*Centerlock is a proprietary mounting system that requires a Shimano lock ring to complete installation of rotor. Chris King R45 Centerlock hubs are compatible with the following Shimano lock rings:
Front:
(Y8K198010) – Typically supplied with genuine Shimano rotor.
(Y26N98030) – Typically sold as an after market part.
Rear:
(Y26N98030) – Typically sold as an after market part$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP) -
Stock Code:CKWH-15B-DCB1BBStock Code:CKWH-15B-DCB2BBStock Code:CKWH-15B-DCBYBBStock Code:CKWH-15B-DCH2BBStock Code:CKWH-15B-DCS1BBStock Code:CKWH-15B-DCP1BBStock Code:CKWH-15B-DCZ2BBStock Code:CKWH-15B-DCB1CBStock Code:CKWH-15B-DCB2CBStock Code:CKWH-15B-DCM2CBStock Code:CKWH-15B-DCR1CBStock Code:CKWH-15B-DCS1CBStock Code:CKWH-15B-DCT2CBStock Code:CKWH-15B-DCBYCBStock Code:CKWH-15B-DCH2CBStock Code:CKWH-15B-DCN1CBStock Code:CKWH-15B-DCY1CBStock Code:CKWH-15B-DCP1CBStock Code:CKWH-15B-DCZ1CB
Chris King Boost Centerlock front hubs are designed as precision mountain tools. We use one-piece axles to provide a stiff hub with rail accurate steering. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals and snaprings, that provide superior protection with ultra low drag.
Our bearings have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearings break in they get faster with age. All our hubs and bearings are fully serviceable for years upon years of demanding use.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Wide flange placement
- Fits 110x15mm Boost
- Legendary made-in-house bearings
- Easily serviceable with a T10 Torx and pick or pen knife
- Completely re-buildable with our Hub Service Tool$500.00 (RRP)$500.00 (RRP)$535.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$535.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP) -
Stock Code:CKWH-48-ECB1BB3Stock Code:CKWH-48-ECB1BB2Stock Code:CKWH-48-ECB1BB1Stock Code:CKWH-48-ECBYBB2Stock Code:CKWH-48-ECBYBB3Stock Code:CKWH-48-ECS1BB3Stock Code:CKWH-48-ECP1BB3Stock Code:CKWH-48-ECB2BB3Stock Code:CKWH-48-ECB2CB2Stock Code:CKWH-48-ECB2CB3Stock Code:CKWH-48-ECH2CB3Stock Code:CKWH-48-ECM2CB3Stock Code:CKWH-48-ECR1CB3Stock Code:CKWH-48-ECS1CB2Stock Code:CKWH-48-ECS1CB3Stock Code:CKWH-48-ECT2CB3Stock Code:CKWH-48-ECB1CB3Stock Code:CKWH-48-ECB1CB1Stock Code:CKWH-48-ECBYCB2Stock Code:CKWH-48-ECS1CB1Stock Code:CKWH-48-ECBYCB3Stock Code:CKWH-48-ECB1CB2Stock Code:CKWH-48-ECB2CB1Stock Code:CKWH-48-ECY1CB3Stock Code:CKWH-48-ECP1CB3
Chris King Boost Centerlock 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals, and a threaded driveshell seal ring.
Our bearings have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing races break in they get faster with age. All our hubs and bearings are fully serviceable for years upon years of demanding use.
The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Canted flanges for stronger wheel builds
- Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
- Legendary made-in-house bearings
- Available with Micro Spline, HG or XD driveshell
- Easily serviceable with a T10 Torx and pick or pen knife
- Specifically designed for "BOOST" 148mm x 12mm axle standard$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$969.00 (RRP)$969.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$930.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$969.00 (RRP)$933.00 (RRP)$969.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP) -
Stock Code:CKWH-DAS1AAStock Code:CKWH-DAB1AAStock Code:CKWH-DAB2AAStock Code:CKWH-DAR1AAStock Code:CKWH-DAP1AAStock Code:CKWH-DAT2AAStock Code:CKWH-DAS1BAStock Code:CKWH-DAT2BAStock Code:CKWH-DAB2BAStock Code:CKWH-DAP1BAStock Code:CKWH-DAB1BAStock Code:CKWH-DAB1CAStock Code:CKWH-DAR1CAStock Code:CKWH-DAT2CAStock Code:CKWH-DAS1CA
R45 Centerlock™ hubs combine a lightweight hub body, our legendary made-in-house bearings, and now *Centerlock compatibility to harness the power of disc brakes. The result is the undeniable combination of the control of disc brakes, the fast rolling speed of our bearings.
- Engineered, manufactured and assembled in Portland, Oregon USA
- Legendary made-in-house bearings
- 5-year built-to-last warranty
- Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options.
- Easily serviceable and completely re-buildable with our R45 Hub Service Tool
- Ceramic bearing upgrade available
*Centerlock is a proprietary mounting system that requires a Shimano lock ring to complete installation of rotor. Chris King R45 Centerlock hubs are compatible with the following Shimano lock rings:
Front:
(Y8K198010) – Typically supplied with genuine Shimano rotor.
(Y26N98030) – Typically sold as an after market part.
Rear:
(Y26N98030) – Typically sold as an after market part$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP) -
Stock Code:CKWH-48-EFB1BB2Stock Code:CKWH-48-EFB1BB3Stock Code:CKWH-48-GFS1BB3Stock Code:CKWH-48-GFY1BB3Stock Code:CKWH-48-EFS1CB3Stock Code:CKWH-48-EFB1CB2Stock Code:CKWH-48-GFB1CB3
Chris King Boost 6-Bolt 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost 6-Bolt hubs have heavy-duty bearing seals, and a threaded driveshell seal ring.
Our bearings, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Canted flanges for stronger wheel builds
- Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
- Legendary made-in-house bearings
- Available with Micro Spline, HG or XD driveshell.
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with the ISO Hub Service Tool
- Responsibly lightweight
- Specifically designed for "BOOST" 148mm x 12mm axle standard$933.00 (RRP)$933.00 (RRP)$895.00 (RRP)$895.00 (RRP)$933.00 (RRP)$933.00 (RRP)$895.00 (RRP)
