- Home /
- Components /
- Wheel Hubs /
- Halo MT Supadrive Hub 142x12 32h XD Blk
Halo MT Supadrive Hub 142x12 32h XD Blk
Description
Our MT series hubs are our flagship mountain bike hub range. The MT series encompass everything we feel hubs for mountain biking should offer.
Durability, modularity and light weights make the MT Series a simple choice.
Suited best to XC, trail and enduro bikes alike, the MT Supadrive hub offers a 120 point near instant engagement with the ability to withstand substantial torque loads, such as those found with wide range cassettes. With multiple World Championship titles across a range of disciplines the Supadrive system is tried and tested to the very highest level and is our most advanced and reliable drive system to date.
Wide spoke flanges, sealed cartridge bearings and a Cr-Mo tube axle in the MT Supadrive hub ensure longevity.
Designed to be run with mountain bike gearing, the MT Supadrive hub features an XD driver or alternatively a MTB width HG freehub. Please refer to the GXC Supadrive for a 11 speed road cassette compatibility.
An additional Boost adaptor kit is also available, to retrofit this hub into Boost compatible frames.
Webshops and Bike shops
You may also be interested in...
-
Our high performance R45 Disc hubs are built to meet the requirements of the world’s most demanding road and cyclocross riders with the long-term performance, durability, and serviceability that you expect from Chris King components. We equip our R45 Discs with the same race proven 45 point RingDrive engagement system and exceedingly smooth in-house made bearings.
These hubs feature an exquisitely machined 6-bolt disc mount that melds current disc mount specifications with elegant design for a beautiful finish and seamless integration. The front hub retains traditional 100mm spacing while the rear hub is designed around 135mm spacing, which has been established as the industry standard for disc compatible road and cyclocross bicycles.Stock Level:1Stock Level:1Stock Level:Out of StockPOA$742.23 (RRP) -
Stock Code:CKWH-48-ECB1BB3Stock Code:CKWH-48-ECB1BB2Stock Code:CKWH-48-ECB1BB1Stock Code:CKWH-48-ECS1BB3Stock Code:CKWH-48-ECP1BB3Stock Code:CKWH-48-GCB2BB3Stock Code:CKWH-48-ECB2CB2Stock Code:CKWH-48-ECH2CB3Stock Code:CKWH-48-ECM2CB3Stock Code:CKWH-48-ECR1CB3Stock Code:CKWH-48-ECS1CB2Stock Code:CKWH-48-ECS1CB3Stock Code:CKWH-48-ECT2CB3Stock Code:CKWH-48-ECB1CB3Stock Code:CKWH-48-ECB1CB1Stock Code:CKWH-48-ECS1CB1Stock Code:CKWH-48-ECB1CB2Stock Code:CKWH-48-ECB2CB1Stock Code:CKWH-48-ECY1CB3Stock Code:CKWH-48-ECP1CB3Stock Code:CKWH-48-ECY1CB2Stock Code:CKWH-48-GGB2CB3
Chris King Boost Centerlock 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals, and a threaded driveshell seal ring.
Our bearings have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing races break in they get faster with age. All our hubs and bearings are fully serviceable for years upon years of demanding use.
The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Canted flanges for stronger wheel builds
- Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
- Legendary made-in-house bearings
- Available with Micro Spline, HG or XD driveshell
- Easily serviceable with a T10 Torx and pick or pen knife
- Specifically designed for "BOOST" 148mm x 12mm axle standardStock Level:In StockStock Level:1Stock Level:1Stock Level:1Stock Level:In StockStock Level:2Stock Level:1Stock Level:Out of StockStock Level:2Stock Level:In StockStock Level:In StockStock Level:In StockStock Level:Out of StockStock Level:Out of StockStock Level:1Stock Level:In StockStock Level:Out of StockStock Level:2Stock Level:Out of StockStock Level:2Stock Level:1Stock Level:2Stock Level:In Stock$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$930.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP) -
Stock Code:CKWH-48-ECB1BB3Stock Code:CKWH-48-ECB1BB2Stock Code:CKWH-48-ECB1BB1Stock Code:CKWH-48-ECS1BB3Stock Code:CKWH-48-ECP1BB3Stock Code:CKWH-48-GCB2BB3Stock Code:CKWH-48-ECB2CB2Stock Code:CKWH-48-ECH2CB3Stock Code:CKWH-48-ECM2CB3Stock Code:CKWH-48-ECR1CB3Stock Code:CKWH-48-ECS1CB2Stock Code:CKWH-48-ECS1CB3Stock Code:CKWH-48-ECT2CB3Stock Code:CKWH-48-ECB1CB3Stock Code:CKWH-48-ECB1CB1Stock Code:CKWH-48-ECS1CB1Stock Code:CKWH-48-ECB1CB2Stock Code:CKWH-48-ECB2CB1Stock Code:CKWH-48-ECY1CB3Stock Code:CKWH-48-ECP1CB3Stock Code:CKWH-48-ECY1CB2Stock Code:CKWH-48-GGB2CB3
Chris King Boost Centerlock 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals, and a threaded driveshell seal ring.
Our bearings have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing races break in they get faster with age. All our hubs and bearings are fully serviceable for years upon years of demanding use.
The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Canted flanges for stronger wheel builds
- Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
- Legendary made-in-house bearings
- Available with Micro Spline, HG or XD driveshell
- Easily serviceable with a T10 Torx and pick or pen knife
- Specifically designed for "BOOST" 148mm x 12mm axle standardStock Level:In StockStock Level:1Stock Level:1Stock Level:1Stock Level:In StockStock Level:2Stock Level:1Stock Level:Out of StockStock Level:2Stock Level:In StockStock Level:In StockStock Level:In StockStock Level:Out of StockStock Level:Out of StockStock Level:1Stock Level:In StockStock Level:Out of StockStock Level:2Stock Level:Out of StockStock Level:2Stock Level:1Stock Level:2Stock Level:In Stock$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$930.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP)$933.00 (RRP) -
Stock Code:CKWH-15B-DDB1BBStock Code:CKWH-15B-DDS1BBStock Code:CKWH-15B-DDB1CBStock Code:CKWH-15B-DDS1CB
The Boost 6-Bolt front is specifically for “Boost” disc spacing forks with 110x15mm "Boost" axles. Using the larger diameter hubshell bearing the Boost 6-Bolt is designed to tackle rough terrain and aggressive riding such as downhill and enduro. In an evolving landscape of axle specifications, we are confident that the “Boost” disc location is here to stay.
Chris King Boost 6-Bolt front hubs are designed as precision mountain tools. We use one-piece axles to provide a stiff hub with rail accurate steering, transferring every minute adjustment you make to the trail. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and snaprings, that provide superior protection with ultra low drag.
Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Wide flange placement
- Fits 110x15mm Boost axles
- Legendary made-in-house LD bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with the Universal Hub Service Tool
- Responsibly lightweightStock Level:In StockStock Level:2Stock Level:Out of StockStock Level:1Stock Level:1$500.00 (RRP)$500.00 (RRP)$500.00 (RRP)$500.00 (RRP) -
Stock Code:CKWH-48-EFB1BB2Stock Code:CKWH-48-EFB1BB3Stock Code:CKWH-48-GFS1BB3Stock Code:CKWH-48-GFY1BB3Stock Code:CKWH-48-GFBFBB3Stock Code:CKWH-48-EFB1CB2Stock Code:CKWH-48-GFB1CB3Stock Code:CKWH-48-GFS1CB3
Chris King Boost 6-Bolt 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost 6-Bolt hubs have heavy-duty bearing seals, and a threaded driveshell seal ring.
Our bearings, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Canted flanges for stronger wheel builds
- Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
- Legendary made-in-house bearings
- Available with Micro Spline, HG or XD driveshell.
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with the ISO Hub Service Tool
- Responsibly lightweight
- Specifically designed for "BOOST" 148mm x 12mm axle standardStock Level:In StockStock Level:2Stock Level:Out of StockStock Level:Out of StockStock Level:Out of StockStock Level:1Stock Level:Out of StockStock Level:1Stock Level:Out of Stock$933.00 (RRP)$933.00 (RRP)$895.00 (RRP)$895.00 (RRP)$969.00 (RRP)$933.00 (RRP)$895.00 (RRP)$933.00 (RRP)