Halo Devaura RD2 C/L 700 142mm Shimano
Description
The Devaura Series is ready whatever the conditions, to offer you the aerodynamic advantage.
Our brand new Devaura Disc RD2 wheels utilise Center Lock disc brake technology, allowing consistently powerful braking on the road and CX courses alike.
The 19mm internal, 24mm external rim widths allow you to run your choice of traditional or tubeless tyres and are well suited to modern tyres ranging from 25C through to 38C widths to deliver enhanced comfort and grip.
At the core of our Devaura Disc RD2 wheels are our all new 120 point pick up RD2 Supadrive and RD2 Front hubs, with sealed bearings and wide spaced flanges for increased durability. These are hand built onto the dependable 30mm deep rims with our very own Aero Racing bladed spokes to decrease wind resistance. Both front and rear wheels use a 16/8e lacing pattern to balance spoke tensions and withstand torque and braking forces from centre of the wheels, reducing any possible lateral flex and increase power transfer.
Supplied pre-taped, Devaura Disc RD2 wheels are tubeless ready from the box.
Included Fittings
Rear: 142 x 12mm Alloy thru (135 x QR5/10mm available aftermarket)
Webshops and Bike shops
You may also be interested in...
-
Stock Code:HLWL-WHHAVX7VZStock Code:HLWL-WHHAVX7VZXStock Code:HLWL-WHHAVX9VZStock Code:HLWL-WHHAVX9VZX
Built around the traverses of the Enduro World Series our Vortex wheels redefine what Enduro wheels are.
With a generous 33mm internal width Vortex wheels increase tyre volume and maximise the available grip on offer. Using an asymmetric design we have equalised spoke tensions and built a package that leaves descents in its wake, whilst cutting down weight where it isn’t needed for energy sapping climbs. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Vortex offers offset wheel benefits, without compromise.
At the core of our Vortex wheels are our new and improved instantaneous 120 point pick up MT Supadrive and MT Front hubs, with sealed bearings and super wide spaced flanges for increased stiffness and durability.
100% hand built and pre fitted with tubeless tape, Vortex wheels are tubeless ready from the box.
Coloured decal kits available aftermarket.
Spokes: Black double butted stainless spokes
Nipples: Black ED coated brass nipples
Rim Depth: 20.75mm
Internal Width: 33mm
External Width:38mm
Rim Joint type: Sleeved
Drillings: 32H
Freehub: Shimano HG or SRAM XD versions
Freehub Body: Alloy
Drive System: Supadrive
Disc Mount: 6 Bolt
Spoke pattern: Front 2X, Rear 3X
Recommended Tyre size: 2.35-2.8"
Tubeless: Tubeless ready$590.00 (RRP)$590.00 (RRP)$590.00 (RRP)$590.00 (RRP) -
Stock Code:HLWL-WHHAGA9FZStock Code:HLWL-WHHAGA9BZ
Designed for and tested on the Downhill World Cup Circuit, for lap-crushing confidence.
With a honed 27.5mm internal width, Gravitas wheels offer tyres large sidewall support, while remaining narrow enough to avoid unnecessary rock collisions.
Using our tried and tested asymmetric design we have equalised spoke tensions and built a package that dominates descents, whilst cutting down on bulk where it isn’t needed. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Gravitas offers offset wheel benefits, without compromise.
At the core of these Gravitas wheels are our all-new instantaneous 120 point pick-up MTC Supadrive Boost and MTC Front Boost hubs, with sealed bearings and super-wide spaced flanges for increased stiffness and durability.
100% hand-built and pre-fitted with tubeless tape, Gravitas wheels are tubeless-ready from the box.
- Front Boost 110 x 15mm thru
- Rim Depth 20mm
- Internal Rim Width 27.5mm
- External Rim Width 33mm
- Drillings 32H
- Disc Mount 6 BOLT
- Recommended Tyre size 2.25-2.7"
- Tubeless ready$490.00 (RRP)$490.00 (RRP) -
Stock Code:HLWL-WHHAGA9CZ
Designed for and tested on the Downhill World Cup Circuit, for lap-crushing confidence.
With a honed 27.5mm internal width, Gravitas wheels offer tyres large sidewall support, while remaining narrow enough to avoid unnecessary rock collisions.
Using our tried and tested asymmetric design we have equalised spoke tensions and built a package that dominates descents, whilst cutting down on bulk where it isn’t needed. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Gravitas offers offset wheel benefits, without compromise.
At the core of these Gravitas wheels are our all-new instantaneous 120 point pick-up MTC Supadrive Boost and MTC Front Boost hubs, with sealed bearings and super-wide spaced flanges for increased stiffness and durability.
100% hand-built and pre-fitted with tubeless tape, Gravitas wheels are tubeless-ready from the box.
- Front Boost 110 x 15mm thru
- Rim Depth 20mm
- Internal Rim Width 27.5mm
- External Rim Width 33mm
- Drillings 32H
- Disc Mount 6 CENTER LOCK
- Recommended Tyre size 2.25-2.7"
- Tubeless ready$490.00 (RRP) -
Stock Code:CKWL-WB182904
* COMES WITH BLACK HUBS NOT TURQUOISE AS IN THE PICTURE
The GRD23 is not like other wheels in many respects. It’s an all-road wheel that offers you a bit more compliance than other carbon all-road wheels. Having said that, it’s not soft. It’s not noodly. It’s just a bit friendlier to your bones when you ride it on all the stuff you ride.
The GRD23 rim is made of FusionFiberTM, a cutting edge thermoplastic that incorporates long-chain polymers. Without diving into the science, FusionFiberTM has a wider range of compliance profiles, and that means we could tune this wheel to hit a sweet spot in road feel that we didn’t see being served by more performance-oriented carbon wheelsets that focus on using resin to create unforgiving stiffness.
Unlike other carbon rims, the GRD23 rim is recyclable. If you manage to break it somehow, we’ll take it back and make it into something new.
Another reason you want this wheelset is that it’s built around our R45D Centerlock hubs, the culmination of over 45 years of bearing experience and more than 20 years of hub building experience. It features a redesigned RingDrive™ system with 45 teeth for lower drag and near instant simultaneous engagement, a lightweight hub body, and our legendary made-in-house bearings.
Those bearings, both steel and ceramic, have heat-treated, surgical grade steel races machined in tandem to ensure perfect matching. The quality and speed of our bearings is what you feel (and hear) on every ride. As the tracks on Chris King bearing break in and burnish they actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use.
This wheelset comes with the legendary angry-bee sound and you can choose from a bunch of sharp hub colors, including basic black.
- Built in-house with legendary Chris King precision
- Made in the USA
- 24 hole Chris King R45D Centerlock hubs
- Centerlock Lock ring sold separately and required for installation
- Tubeless Tape and Valve Kit included with this wheelset
- King Lifetime warranty$2,500.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAH6PBSX
A tribute to Halo’s history in the dirt jump and MTB market, we have created this retro-inspired Chaos Dirt Jump Wheelset.
Featuring the iconic wide boy front hub and MT-SS 135mm x M10 (which is adaptable for 142mm X 12mm for thru-axle frames) They are laced with Stainless double butted silver spokes and black brass nipples to the durable Chaos rim. For this edition, we have shot peened and anodised the Chaos rims in a classic grey colour. Tubeless taped and ready out the box.
Utilising our tried and tested Chaos rim which offers tubeless compatibility where required, as well as a 22.5mm internal (28mm external) width. These widths have been optimised for strength in addition to tyre profiling.
To offer versatility the front hub is adaptable to fit both older and more modern frame standards. The optional adaptors for various fork types further enhance compatibility, allowing riders to customise their setup according to their preferences.
This hub comes as 15x100mm thru axle as standard.
The use of the MT Supadrive SS hub on the rear wheel is a great choice for high-performance riding, with its 120-point Supadrive mechanism and sealed bearings, it provides a smooth and reliable power transfer. Additionally, the cassette spacer kit (1x 5mm, 2x 2.5mm, 1x 0.5mm and Lock ring.) and the option to use Fat foot sprockets in a range of sizes offer further customisation possibilities for riders seeking the perfect gear ratio.$980.00 (RRP)Add To Cart
