Salsa Bend Bar17 degree bend 31.8 710mm
Description
For those seeking a different take on a traditional mountain bike handlebar, the Salsa Bend Bar is available with either a 17 or 23° sweep, offering a more natural hand position without affecting reach or requiring the need to change your stem length. The Bend Bar swoops forward, then sweeps back to create an angled perch that’s easy to hang on to. They’re tough, strong and durable, and great for long days bikepacking, touring, or shredding singletrack.
Constructed using double-butted, AL-7050-T76 aluminum
Bar sweeps forward, then back, to preserve stem length
5° upsweep allows adjustment to suit personal preference
Bar can be flip-flopped to run up or down
Graduated ends for easy trimming
Bead-blast black finish
17° sweep, 710mm width
Webshops and Bike shops
You may also be interested in...
-
Stock Code:TNHB-HB-E128
Thomson Cyclocross 42x31.8 Carbon
Clipon compatible keep all accessory clamps inside the area marked on the bar as safe for clamping. 90mm total safe clamp area available.
For Cyclocross we present the carbon CX bar. The natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a completely round bar when wrapped. Top profile is round and as wide as possible. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
Reach 78.5mm. Drop is proportional.
Cross drops are: 40CM 131mm, 42CM 133mm, 44CM 135mm.$355.00 (RRP) -
Stock Code:TNHB-HB-E120Stock Code:TNHB-HB-E121Stock Code:TNHB-HB-E122
Our aluminum drop bars bring the performance, and dependability you have come to expect from Thomson. The lineup is available in 3 profiles, and varying widths. Each made from 7000 series aluminum. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.
Our road bar wing section is small enough not to restrict hand movements when riding on the top, and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.
The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm
The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm
The Dirt drop is available in 44cm, and 46cm, a wide drop bar with 25° flare ready for your next adventure, regardless of the road you choose.$215.00 (RRP)$215.00 (RRP)$215.00 (RRP) -
Stock Code:SAHB-HB0349Stock Code:SAHB-HB0351Stock Code:SAHB-HB0352Stock Code:SAHB-HB0353
Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12-degree flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops.
- Lightweight and strong 7050-T76 series alloy construction with polished finish
- Drop/Reach: 115/68mm
- 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars
- 12 deg flare and drop anglesPOAPOAPOAPOA -
Stock Code:WSHB-HB8203
Quite literally the first and only of its kind, the Milhouse Handlebar is a full carbon moto-inspired riser bar. Strong, compliant, and rigorously tested for trail duty, its aesthetic makes it an intriguing component for custom builders and upgraders alike.
- Unidirectional carbon fiber construction
- Trimmable ends, made easy with graphic markings
- No rider weight limit
- ASTM Condition 3 – For rough off-road riding and jumps less than 24”
- 90mm clamping area to fit Salsa Anything Cradle
- 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep$525.00 (RRP)POA -
Stock Code:SMHB278021
Riser bar with extra bend, but a low rise. Not as much bend as Soma's original Dream Riser, but enough so grips don't get in the way of large bar bags.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 25mm
– Backsweep: 20 degrees
– Upsweep: 5 degrees
– Weight: 425g$190.00 (RRP)Add To Cart
