Salsa Bent Rack Struts 45d 8mm
Description
Salsa Bicycle Mounted Rack Parts
Diameter: 8mm
Overall Length: 345mm
After Bend: 270mm
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SMRK18577
Front mini rack with a host of braze-ons for your gadgets.
Read more
Extra long tang is bent for mounting to caliper brake bolt.
P-Clamps and other hardware included.$242.55 (RRP) -
Stock Code:NTRK-NFM18
This rack is designed for light loads, or to support a handlebar bag.
Read more
-Hand-brazed from Chromoly
-Mounts to most bikes with drilled fork crown and incorporates with the caliper brake
-Compatible with some forks that feature mid-blade braze-ons dependent upon braze-on position
-Comes with additional set of braze-ons
-Lower rack struts are 235mm at max extension
-Rack surface area: 19cm x 11cm / Weight: 340gExpected Date:20 March 2025$228.00 (RRP) -
Stock Code:SLRK-RK0102Stock Code:SLRK-RK0103
The rear Rack is also height-adjustable, enabling it to fit a wide variety wheel sizes while allowing you to move its center of gravity as low as possible for a more stable ride. Its wide platform has plenty of room for rack trunks, sleeping bags, tents, boxes of lima beans, or small cages full of hamsters. The stainless steel hardware we provide will enable you to fit them to most rigid 26" and 700c frames, and to forks equipped with drum, caliper, or cantilever brakes. Disc brakes and suspension are generally not compatible with our rear Racks, though there is an increasing number of frames designed to allow the use of racks and disc brakes.
Read more
Our rear rack will fit on a Pugsley/Moonlander, though it will sit slightly off-center due to the frame's offset design , and it sits a bit higher than normal since the mounts are part of the way up the seat stays rather than right at the dropouts like usual (this is to allow disc brake clearance). This is not something that will greatly affect the performance of the rack, but if you notice it try playing around with how you have your weight distributed on the rack until it feels "normal".
Rear rack WILL work with disc brakes on our Troll, Ogre, ECR, and Disc Trucker framePOAPOA -
Stock Code:SLRK-RK0147
The Surly Rear Disc Rack is made of tubular CroMoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650b and 700c), Krampus, and Karate Monkey.
Read more
- Tubular CroMoly rack, stainless-steel hardware
- Height-adjustable to accommodate 26-29" wheels
- Hardware housed in reusable Surly Tool Bag
- NOTE: The following "RK" part numbers will not be compatible with the new Rear Disc Racks: RK013, RK0121, RK0134
- Surly Rear Rack will haul up to 30kg (66 lb) of well-secured
- Platform dimensions: 350 x 150mm
- Weight: 1606g$270.00 (RRP)POA -
Stock Code:JRRK-STFB-X1
Our 20mm webbing straps are woven from 100% pre consumer recycled nylon and have a simple built in anchor so when you are tightening your load down it doesn't slip around.
Read more
Each strap is 1.4m long and come in pairs. They are compatible with every lug point on JACK.$30.00 (RRP)Add To Cart
