Halo T2 24inch Front 15mm 32H Wheel
Description
Middleweight multi-purpose 24? MTB wheels.
Light and strong, angular style box section rim, with eyelets and a stable screw-pin joint.
The front wheel features the Halo MT front hub and the rear comes with our sealed bearing Halo Spin Doctor hub.
Both wheels come with black ED finished spokes.
The Black Anodised finish 32mm rims are suitable for Vs or Disc brakes, whilst the White Powder coated option is recommended for disc use only.
Note: Anodised finish rims will accept V-brakes but the brake surface colour finish will wear.
Included Fittings Front: 100 x 15mm thru
Webshops and Bike shops
You may also be interested in...
-
Stock Code:HLWL-WHHAD2KF
The Devaura Series is ready whatever the conditions, to offer you the aerodynamic advantage.
Our brand new Devaura Disc RD2 wheels utilise Center Lock disc brake technology, allowing consistently powerful braking on the road and CX courses alike.
The 19mm internal, 24mm external rim widths allow you to run your choice of traditional or tubeless tyres and are well suited to modern tyres ranging from 25C through to 38C widths to deliver enhanced comfort and grip.
At the core of our Devaura Disc RD2 wheels are our all new 120 point pick up RD2 Supadrive and RD2 Front hubs, with sealed bearings and wide spaced flanges for increased durability. These are hand built onto the dependable 30mm deep rims with our very own Aero Racing bladed spokes to decrease wind resistance. Both front and rear wheels use a 16/8e lacing pattern to balance spoke tensions and withstand torque and braking forces from centre of the wheels, reducing any possible lateral flex and increase power transfer.
Supplied pre-taped, Devaura Disc RD2 wheels are tubeless ready from the box.
Included Fittings
Front: 100 x 12mm thru (100 x QR5/9mm available aftermarket)$390.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAH6JVK
Chaos are the World Championship winning, benchmark wheels for dirt jumping.
Used and loved world over by riders and endorsed by international professionals Sam Pilgrim and Matt Jones. Chaos wheels are at the pinnacle of dirt jump wheels that stand up to the hardest of use.
These wheels utilise our tried and tested Chaos rim which offers tubeless compatibility where required, as well as a 22.5mm internal (28mm external) width. These widths have been optimised for strength in addition to tyre profiling.
The rear wheels are built around our single speed specific DJD hubs. These feature our 120 point pick up Supadrive freehub system on a reliable Bushdrive bushing system which enables the use of cogs as small as 9 tooth.
All of our DJ series hubs utilise large sealed bearings for longevity and super wide spaced flanges for increased stiffness and durability.
*** Our rear wheels no longer come with a sprocket included, so please choose an additional ‘DJD Supadrive and Bushdrive Sprocket’ to suit your bike.
Included Fittings
Rear Standard: 135mm x m10 bolt in axle system with 14mm adaptors$590.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAGA9FZStock Code:HLWL-WHHAGA9BZ
Designed for and tested on the Downhill World Cup Circuit, for lap-crushing confidence.
With a honed 27.5mm internal width, Gravitas wheels offer tyres large sidewall support, while remaining narrow enough to avoid unnecessary rock collisions.
Using our tried and tested asymmetric design we have equalised spoke tensions and built a package that dominates descents, whilst cutting down on bulk where it isn’t needed. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Gravitas offers offset wheel benefits, without compromise.
At the core of these Gravitas wheels are our all-new instantaneous 120 point pick-up MTC Supadrive Boost and MTC Front Boost hubs, with sealed bearings and super-wide spaced flanges for increased stiffness and durability.
100% hand-built and pre-fitted with tubeless tape, Gravitas wheels are tubeless-ready from the box.
- Front Boost 110 x 15mm thru
- Rim Depth 20mm
- Internal Rim Width 27.5mm
- External Rim Width 33mm
- Drillings 32H
- Disc Mount 6 BOLT
- Recommended Tyre size 2.25-2.7"
- Tubeless readyExpected Date:01 March 2025$490.00 (RRP)$490.00 (RRP) -
Stock Code:HLWL-WHHAGA9MZM
Designed for and tested on the Downhill World Cup Circuit, for lap-crushing confidence.
With a honed 27.5mm internal width, Gravitas wheels offer tyres large sidewall support, while remaining narrow enough to avoid unnecessary rock collisions.
Using our tried and tested asymmetric design we have equalised spoke tensions and built a package that dominates descents, whilst cutting down on bulk where it isn’t needed. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Gravitas offers offset wheel benefits, without compromise.
At the core of these Gravitas wheels are our all-new instantaneous 120 point pick-up MTC Supadrive Boost and MTC Front Boost hubs, with sealed bearings and super-wide spaced flanges for increased stiffness and durability.
100% hand-built and pre-fitted with tubeless tape, Gravitas wheels are tubeless-ready from the box.
- Rear Boost 114mm
- Rim Depth 20mm
- Internal Rim Width 27.5mm
- External Rim Width 33mm
- Drillings 32H
- Disc Mount 6 CENTER LOCK
- Recommended Tyre size 2.25-2.7"
- Tubeless ready$590.00 (RRP)Add To Cart
-
Stock Code:CKWL-WB182904
* COMES WITH BLACK HUBS NOT TURQUOISE AS IN THE PICTURE
The GRD23 is not like other wheels in many respects. It’s an all-road wheel that offers you a bit more compliance than other carbon all-road wheels. Having said that, it’s not soft. It’s not noodly. It’s just a bit friendlier to your bones when you ride it on all the stuff you ride.
The GRD23 rim is made of FusionFiberTM, a cutting edge thermoplastic that incorporates long-chain polymers. Without diving into the science, FusionFiberTM has a wider range of compliance profiles, and that means we could tune this wheel to hit a sweet spot in road feel that we didn’t see being served by more performance-oriented carbon wheelsets that focus on using resin to create unforgiving stiffness.
Unlike other carbon rims, the GRD23 rim is recyclable. If you manage to break it somehow, we’ll take it back and make it into something new.
Another reason you want this wheelset is that it’s built around our R45D Centerlock hubs, the culmination of over 45 years of bearing experience and more than 20 years of hub building experience. It features a redesigned RingDrive™ system with 45 teeth for lower drag and near instant simultaneous engagement, a lightweight hub body, and our legendary made-in-house bearings.
Those bearings, both steel and ceramic, have heat-treated, surgical grade steel races machined in tandem to ensure perfect matching. The quality and speed of our bearings is what you feel (and hear) on every ride. As the tracks on Chris King bearing break in and burnish they actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use.
This wheelset comes with the legendary angry-bee sound and you can choose from a bunch of sharp hub colors, including basic black.
- Built in-house with legendary Chris King precision
- Made in the USA
- 24 hole Chris King R45D Centerlock hubs
- Centerlock Lock ring sold separately and required for installation
- Tubeless Tape and Valve Kit included with this wheelset
- King Lifetime warranty$2,500.00 (RRP)Add To Cart
