WOLF TOOTH
-
Stock Code:WTHS-SPLIT-RING
Replacement parts for Wolf Tooth Headsets. These are only compatible with headsets made by Wolf Tooth.
POA -
Stock Code:WTDP-RES2-CONV-125
Spool Valve Conversion Resolve rev1 to rev2 Kit 125mm includes:
- Cylinder Tube
- Spool Body Assembly rev2
- Lower Cap/Actuator Assembly rev2
- Air Filter and Filter RetainerPOA -
Stock Code:WTDP-RES2-CONV-160
Spool Valve Conversion Resolve rev1 to rev2 Kit 160mm includes:
- Cylinder Tube
- Spool Body Assembly rev2
- Lower Cap/Actuator Assembly rev2
- Air Filter and Filter RetainerPOA -
Stock Code:WTDP-RES2-CONV-200
Spool Valve Conversion Resolve rev1 to rev2 Kit 200mm includes:
- Cylinder Tube
- Spool Body Assembly rev2
- Lower Cap/Actuator Assembly rev2
- Air Filter and Filter RetainerPOA -
Stock Code:WTCHSDM8-R-B-06P-46AStock Code:WTCHSDM8-R-B-06P-48AStock Code:WTCHSDM8-R-B-06P-50AStock Code:WTCHSDM8-R-B-06P-52A
Designed for gravel and road racing, and for those looking to optimize each detail in pursuit of speed, Wolf Tooth Aero Chainrings are strong, lightweight, and profiled to mate perfectly with your crankset for a clean, integrated look. Taking advantage of 1x drivetrain systems and wider-range rear cassettes, Aero Chainrings are available in sizes 46T to 52T to provide similar overall range to standard 2x drivetrain configurations. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Drop-Stop B is optimized for SRAM Eagle and Flattop chains.
Aero Direct Mount Chainrings for SRAM 8-Bolt Cranks replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet.
Compatibility:
- These direct mount chainrings will replace your existing chainring and spider or replace the direct mount chainring for SRAM AXS cranksets and other cranks that use the 8-bolt mounting standard.
- SRAM Direct Mount DUB road cranksets use the 8-bolt mounting standard. Any of those cranksets with a removable spider also use the 8-bolt mount.$251.00 (RRP)$261.00 (RRP)$271.00 (RRP)$281.00 (RRP) -
Stock Code:WTCHASM5-SDM26Stock Code:WTCHASM5-SDM28Stock Code:WTCHASM5-SDM30Stock Code:WTCHASM5-SDM32
These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8 bolt mounting interface that is not compatible with these chainrings.
- 9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9 speed, 10 speed, and 11 speed chains. They also work with 12 speed Eagle and 12 speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12 speed Flattop chain.
- Standard: 47mm chainline, 6mm offset for cyclocross and road cranks
- Standard: 49mm chainline, 6mm offset for non-Boost mountain bikes, GXP and long spindle BB30$160.00 (RRP)$160.00 (RRP)$160.00 (RRP)$160.00 (RRP) -
Stock Code:WTCHSDM38-FTStock Code:WTCHSDM40-FTStock Code:WTCHSDM42-FT
Direct Mount Chainrings for SRAM Cranks STANDARD / 6mm Offset FLATTOP
Compatibility
- These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8 bolt mounting interface that is not compatible with these chainrings.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- 10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10 speed, and 11 speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain.$180.00 (RRP)$180.00 (RRP)$180.00 (RRP) -
Stock Code:WTCGSST-SS-COG16Stock Code:WTCGSST-SS-COG17Stock Code:WTCGSST-SS-COG18Stock Code:WTCGSST-SS-COG19Stock Code:WTCGSST-SS-COG20
These are the lightest weight and best looking stainless steel single speed cogs available. They feature extra tall teeth for reliable chain retention when using chain tensioners and are machined from 416 stainless steel billet with heat treating and electropolishing post processing for durability and corrosion resistance. They are reversible and feature a 4.5 mm width at the base that won't dig into your freehub body.
Compatibility:
- These will fit on any Shimano-type freehub spline (geared or single speed)
- Designed to work with any chain
- Tooth width optimized for 9,10, and 11 speed chains$170.00 (RRP)$170.00 (RRP)$170.00 (RRP)$170.00 (RRP)$170.00 (RRP) -
Stock Code:WTSCSTEMCAP5MMBLKStock Code:WTSCSTEMCAP5MMBLUStock Code:WTSCSTEMCAP5MMGLDStock Code:WTSCSTEMCAP5MMORGStock Code:WTSCSTEMCAP5MMPRPStock Code:WTSCSTEMCAP5MMREDStock Code:WTSCSTEMCAP5MMESPStock Code:WTSCSTEMCAP5MMRSILStock Code:WTSCSTEMCAP10MMBLK
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale.
- 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP) -
Stock Code:WTCLSTRATA-LOGOTL-BLKStock Code:WTCLSTRATA-LOGOTM-BLKStock Code:WTCLSTRATA-LOGOTS-BLKStock Code:WTCLSTRATA-LOGOTXL- BLK$51.50 (RRP)$51.50 (RRP)$51.50 (RRP)$51.50 (RRP)
-
Stock Code:WTBT-SUPPLETAPE-BLKStock Code:WTBT-SUPPLETAPE-BLUStock Code:WTBT-SUPPLETAPE-BRNStock Code:WTBT-SUPPLETAPE-ORGStock Code:WTBT-SUPPLETAPE-RED
Supple Bar Tape for drop bars is extra thick, extra wide, extra soft, and extra tacky. Designed for the abuse of unforgiving trails. Keep your hands extra comfortable when the road gets extra rough.
- 5mm thick
- 40mm wide
- 100% silicone compound. Customize the feel of your handlebars with varying levels of overlap. The extra thick and extra wide material creates the same thickness and comfort in one wrap that would take multiple layers of traditional bar tape.
- Washable surface is resistant to wear and packing out.
- Tacky texture keeps your hands from slipping in all weather with or without gloves.
- Self-fusing silicone finishing tape included for a clean finishing touch.$90.00 (RRP)$90.00 (RRP)$90.00 (RRP)$90.00 (RRP)$90.00 (RRP) -
Stock Code:WTBT-SLITE-BARTAPE-BLK
Supple Lite Bar Tape is designed to provide comfort and grip for long days in the saddle on rough terrain. It is tacky, soft, and has a clean look when wrapped and finished. At 2.5mm thick and 40mm wide, it is half as thick and just as wide as our Supple Bar Tape. This makes for a slimmer option that has a distinctly different feel.
- 2.5mm thick
- 40mm wide
- EVA foam compound absorbs vibrations and conforms to your hands for greater comfort.
- Soft, tacky texture keeps your hands from slipping in all weather conditions with or without gloves.
- Easy to install. 3M adhesive backing keeps tape securely in place.
- Thickness can be adjusted from 2.5mm to 5mm based on the amount of overlap.
- Includes: bar plugs, polyurethane finishing tape, and brake clamp cover tape.$61.00 (RRP) -
Stock Code:WTLT25LWRENCH
Long handle T25 Torx L-wrench.
This is the wrench size needed to remove/install the SRAM direct mount chainrings. It can be difficult to properly engage a socket into these bolts because the crank spindle is very close to the bolts. This wrench makes the job easy and reduces the chances of stripping out the bolt head.$6.18 (RRP)Add To Cart
-
Stock Code:WTDRTANPAN-SH10-Inline
The Negotiator.
The Tanpan makes Shimano 10- and 11-speed road shifters work with 10- and 11-speed mountain bike rear derailleurs.
Crossing boundaries and breaking down walls: the Tanpan brings the range and security of Shimano mountain rear derailleurs to Shimano-equipped drop-bar bicycles. This means greater gearing range for bigger adventures, better chain security for rough terrain, and lighter weight and reduced complexity for the daily commute.
In order to deliver these benefits, the Tanpan amplifies road shifter cable pull to allow for seamless communication with mountain derailleurs. The result is ideal for riders looking to convert their road, gravel, cyclocross, or commuter bike to the simplicity and light weight of a single chainring – or for those whose riding demands lower gearing than a typical double can provide. With the addition of a clutch-equipped Shadow+ rear derailleur, the Tanpan provides unparalleled chain security for Shimano road drivetrains.
The 17g Tanpan installs in moments, tucking neatly above the rear derailleur and an indexed barrel provides for quick and easy cable adjustment. Each Tanpan is CNC machined in the USA by Wolf Tooth and comes fitted with precision stainless steel hardware and a sealed cartridge bearing.
Compatibility
- Compatible with most road, gravel and CX bikes.
- Tiagra 4700 is compatible with Tanpan but for proper shifting use Tanpan 11spd and an 11spd rear derailleur with a 10spd cassette.
- ONLY Compatible with Tiagra 4700 when using Tanpan11 and corresponding 11-speed derailleur.
Recommendations
- 1.1mm diameter shift cable recommended and a new cable is always a good idea.
- The Tanpan 10 is compatible with 10-speed Shimano road shifters and optimized for ten-speed Shimano mountain derailleurs.
- 11-speed Shimano mountain derailleurs may be used with only a slight decrease in shifting performance
- The Tanpan 11 is compatible with 11-speed Shimano road shifters and optimized for eleven-speed Shimano mountain derailleurs (includes new Dura Ace 9100)
- Ten-speed Shimano mountain derailleurs may be used with only a slight decrease in shifting performance
- The Tanpan 11 is designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs. Tanpan 10 must be mounted inline for optimal performance.$94.43 (RRP)Add To Cart
-
Stock Code:WTDRTANPAN-SH11-Inline
The Negotiator.
The Tanpan makes Shimano 10- and 11-speed road shifters work with 10- and 11-speed mountain bike rear derailleurs.
Crossing boundaries and breaking down walls: the Tanpan brings the range and security of Shimano mountain rear derailleurs to Shimano-equipped drop-bar bicycles. This means greater gearing range for bigger adventures, better chain security for rough terrain, and lighter weight and reduced complexity for the daily commute.
In order to deliver these benefits, the Tanpan amplifies road shifter cable pull to allow for seamless communication with mountain derailleurs. The result is ideal for riders looking to convert their road, gravel, cyclocross, or commuter bike to the simplicity and light weight of a single chainring – or for those whose riding demands lower gearing than a typical double can provide. With the addition of a clutch-equipped Shadow+ rear derailleur, the Tanpan provides unparalleled chain security for Shimano road drivetrains.
The 17g Tanpan installs in moments, tucking neatly above the rear derailleur and an indexed barrel provides for quick and easy cable adjustment. Each Tanpan is CNC machined in the USA by Wolf Tooth and comes fitted with precision stainless steel hardware and a sealed cartridge bearing.
** Important Note: If the rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle out the very end, you will need to use the inline version. This is because the Tanpan barrel adjuster end sits too close to the frame for the internally routed cable to exit the frame and enter the Tanpan barrel adjuster. The Inline Tanpan includes ferrule and takes place of barrel adjuster in 4mm cable housing.
Compatibility
- Compatible with most road, gravel and CX bikes.
- Tiagra 4700 is compatible with Tanpan but for proper shifting use Tanpan 11spd and an 11spd rear derailleur with a 10spd cassette.
- ONLY Compatible with Tiagra 4700 when using Tanpan11 and corresponding 11-speed derailleur.
Recommendations
- 1.1mm diameter shift cable recommended and a new cable is always a good idea.
- The Tanpan 10 is compatible with 10-speed Shimano road shifters and optimized for ten-speed Shimano mountain derailleurs.
- 11-speed Shimano mountain derailleurs may be used with only a slight decrease in shifting performance
- The Tanpan 11 is compatible with 11-speed Shimano road shifters and optimized for eleven-speed Shimano mountain derailleurs (includes new Dura Ace 9100)
- Ten-speed Shimano mountain derailleurs may be used with only a slight decrease in shifting performance
- The Tanpan 11 is designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs. Tanpan 10 must be mounted inline for optimal performance.$94.43 (RRP)Add To Cart
-
Stock Code:WTDP-RES-SHSC-BRL-TIG$30.85 (RRP)
Add To Cart
-
Stock Code:WTDP-RES-SHSC-BRL-TIR$30.85 (RRP)
Add To Cart
-
Stock Code:WTBC4TIWBBOLT-LPStock Code:WTBC4TIWBBOLTRNBW-LPStock Code:WTBC4TIWBBOLTStock Code:WTBC4TIWBBOLTRNBW
Standard Head - Raw finish
These M5x15mm titanium water bottle cage bolts are available in an oil slick finish or raw silver. Titanium bolts are stronger than aluminum bolts and are a solid upgrade for cyclists who carry cargo by bolting it to their frame. They are sold in packs of four.$34.00 (RRP)$34.00 (RRP)$34.00 (RRP)$34.00 (RRP) -
Stock Code:WTTLTTWrap
When the Wolf Tooth team sat down to design this tool wrap, we made a long list of "must haves"...maybe too long. The end result was the most full-featured bicycle tool wrap available designed to make trailside repairs quick and efficient so you can get out riding. Maybe we are overly excited about optimizing our mobile wrenching experience, but these features might get you going too:
- Top flap that can be shut in a car door for a mobile workshop
- Bottom flap provides a workspace to keep your parts and tools out of the dirt when working on the ground
- Pocket layout is ideal for all the tools you need to build a bike
- Aluminum eyelets for hanging up in your home or workshop$97.85 (RRP)Add To Cart
-
Stock Code:WTWA-TLV-KIT44-BLKStock Code:WTWA-TLV-KIT44-BLUStock Code:WTWA-TLV-KIT44-GLDStock Code:WTWA-TLV-KIT44-ORGStock Code:WTWA-TLV-KIT44-PNKStock Code:WTWA-TLV-KIT44-PRPStock Code:WTWA-TLV-KIT44-RBWStock Code:WTWA-TLV-KIT44-REDStock Code:WTWA-TLV-KIT44-RSIL
These Presta valve stems are compatible with tubeless rims and tires for road, gravel, mountain, and fat bike wheels.
The kit includes two Presta valve stems, two machined aluminum caps, two nuts, two extra valve cores, a unique machined aluminum valve core remover, and three rubber base options for compatibility with more rim internal shapes.
?- 44mm and 60mm stem length options
- Slotted stem base for compatibility with tire inserts
- Oversized stem nut for better sealing and easier removal
- Stem threaded below rubber seal for better performance on single wall rims
- Three rubber bases included: two types of cones (one installed), one channel
- Replacement parts available via Wolf Tooth Right To Repair, including cap kit with two caps, nut kit with two nuts, and valve cores$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP) -
Stock Code:WTWA-TLV-KIT60-BLKStock Code:WTWA-TLV-KIT60-BLUStock Code:WTWA-TLV-KIT60-GLDStock Code:WTWA-TLV-KIT60-ORGStock Code:WTWA-TLV-KIT60-PNKStock Code:WTWA-TLV-KIT60-PRPStock Code:WTWA-TLV-KIT60-RBWStock Code:WTWA-TLV-KIT60-RSILStock Code:WTWA-TLV-KIT60-RED
These Presta valve stems are compatible with tubeless rims and tires for road, gravel, mountain, and fat bike wheels.
The kit includes two Presta valve stems, two machined aluminum caps, two nuts, two extra valve cores, a unique machined aluminum valve core remover, and three rubber base options for compatibility with more rim internal shapes.
?- 44mm and 60mm stem length options
- Slotted stem base for compatibility with tire inserts
- Oversized stem nut for better sealing and easier removal
- Stem threaded below rubber seal for better performance on single wall rims
- Three rubber bases included: two types of cones (one installed), one channel
- Replacement parts available via Wolf Tooth Right To Repair, including cap kit with two caps, nut kit with two nuts, and valve cores$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP) -
Stock Code:WTSCSTEMCAPBLK1Stock Code:WTSCSTEMCAPBLU1Stock Code:WTSCSTEMCAPGLD1Stock Code:WTSCSTEMCAPORG1Stock Code:WTSCSTEMCAPPRP1Stock Code:WTSCSTEMCAPRED1Stock Code:WTSCSTEMCAPRSIL1
Details matter when you are building up a bike and the stem cap should not be overlooked. This ultralight and ultra-sleek stem cap fits flush with your stem or can be used with a spacer under it. It is precision machined out of 7075-T6 aluminum for the lowest weight without any performance compromise.
Compatibility- 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)