Chris King
-
Stock Code:CKSP-JDS1
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.$76.00 (RRP) -
Stock Code:CKSP-JDT2
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.$76.00 (RRP)Add To Cart
-
Stock Code:CKSP-JDP1
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.$76.00 (RRP) -
Stock Code:CKSP-JDBY
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.$89.00 (RRP)Add To Cart
-
Stock Code:CKLU-THB028Stock Code:CKLU-THB027
Chris King Silver Grease is a nano-particle lubricant optimized for hub and bottom bracket bearings. Designed for use as a high performance hub and bottom bracket bearing lubricant. This nano-particle lubricant is engineered to provide extremely low drag while still providing excellent weather resistance. Compatible with steel and Ceramic bearings.
$39.95 (RRP)$47.00 (RRP) -
Stock Code:CKXT-CKC0766
Insulated MIIR camp mug, in the perfect size for any morning or evening beverage, and printed with the classic KING® logo and Splash graphics in honor of our LE Splash component color.
- 355ml
- Press-fit slide lid
- Copper color with Turquoise and black ink$68.00 (RRP)Add To Cart
-
Stock Code:CKCL-CKC0735Stock Code:CKCL-CKC0734$55.00 (RRP)$55.00 (RRP)
-
Stock Code:CKWA-PHB514
Drive Ring Spring Retainer for all rear Chris King® hubs except R45.
$22.50 (RRP) -
Stock Code:CKWH-EDR1CD3Stock Code:CKWH-GDB2CD1Stock Code:CKWH-GDB1CD3
Our Superboost Centerlock 157x12 rear hubs use one-piece solid axles to provide a stiff platform that makes your suspension perform better and gets every one of the watts you make into the dirt. To keep mud and water out of the works they have heavy-duty bearing seals and snaprings that provide superior protection with ultra-low drag. Each one is like a rolling dream of trail riding performance. Our bearings have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use.
The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
All Chris King rear hubs come with that signature, angry-bee sound.
- Engineered, manufactured, and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Canted flanges for stronger wheel builds
- Legendary made-in-house bearings
- Easily serviceable with a T10 Torx and pick or pen knife
- Specifically designed for "SUPERBOOST" 157mm x 12mm axle standard$950.00 (RRP)$950.00 (RRP)$950.00 (RRP) -
Stock Code:CKBB-ACB2Stock Code:CKBB-ACM2
** FIT KIT REQUIRED FOR USE **
ThreadFit™ T47 24i fits 86mm and 92mm shell widths with 24mm spindles.
All our bottom brackets come with King’s legendary, angular-contact bearings. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
The Fit Kit for our ThreadFit™ T47 24i is available here.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- Engineered, manufactured and assembled in Portland, Oregon USA
- A Fit Kit is required for use
- Uses Chris King bottom bracket cup tool for installation$349.00 (RRP)$349.00 (RRP) -
Stock Code:CKBB-ADB2Stock Code:CKBB-ADS1Stock Code:CKBB-ADB1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ T47 24x fits 68mm and 73mm shell widths with 24mm spindles.
It’s a silky smooth, long-lasting bottom bracket built around King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation$349.00 (RRP)$349.00 (RRP)$349.00 (RRP) -
Stock Code:CKBB-AEB1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ T47 30i will fit 68mm, 73mm, 83mm, 86mm, and 92mm shell widths with 30mm spindles.
All our bottom brackets come with King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation$349.00 (RRP) -
Stock Code:CKBB-AFB2Stock Code:CKBB-AFY1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ T47 30x fits 68mm and 73mm shell widths with 30mm spindles.
This bottom bracket comes packed with King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation$349.00 (RRP)$349.00 (RRP) -
Stock Code:CKBB-AGB1
ThreadFit™ T47A 24 fits T47 BB-Right shells with 24mm spindles.
It’s a silky smooth, long-lasting bottom bracket built around King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
** Fit Kit required for use
- King Lifetime Warranty
- Legendary made-in-house bearings
- Engineered, manufactured and assembled in Portland, Oregon USA
* Uses Chris King bottom bracket cup tool for installation$349.00 (RRP) -
Stock Code:CKWH-15B-FT1230Stock Code:CKWH-15B-FQ1232
• 110x15mm Thru Axle
• Legendary Chris King bearings
• Updated hub shell shape with thicker, stronger flanges
• Symmetrical front hub flanges
• Hub flanges move outboard by 5mm to improve the spoke bracing angle and increase lateral stiffnessWas:$300.00 (RRP)Now:$275.00 (RRP)Price:$275.00 (RRP)Was:$300.00 (RRP)Price:$300.00 (RRP) -
Stock Code:CKWA-PHB774B
Conversion kit for Chris King ISO hubs to XD using new internals and axle from the new C/L Boost hubs.
Includes freehub and bearings, axle, and adjusting clamp. Can be used in C/L Boost hubs without the adjusting clamp.$403.00 (RRP)Add To Cart
-
Stock Code:CKWA-PHB828B$76.00 (RRP)
Add To Cart
-
Stock Code:CKWA-PHB841B$76.00 (RRP)
Add To Cart
-
Stock Code:CKWA-CKP506HStock Code:CKWA-CKP504HStock Code:CKWA-CKP503H
Lightweight, stylish, and anodized to match your Chris King precision components, King Thru Axles are the perfect pop of refined detail to bring together your perfect bike build.
A collaboration with Robert Axle Project, King Thru Axles are machined in Oregon by Robert Axle Project and then finished, anodized, and laser marked by Chris King Precision Components. We're proud to work with Robert Axle Project and support more responsible and ethical manufacturing in the cycling industry, especially with a neighbor just a few hours away here in Oregon.
Robert Axle Project's website will help you measure your axle.
- Low profile and lightweight.
- Machined to the tightest standards in the industry.
- Designed, built and quality tested in the USA. Proven around the world.
- Available for front or rear wheel use. Available to fit road, cross, gravel, e-bikes and mountain bikes.
- Not designed to attach Trailers or Trainers.Was:$135.45 (RRP)Now:$97.90 (RRP)Price:$97.90 (RRP)Was:$135.45 (RRP)Now:$97.90 (RRP)Price:$97.90 (RRP)Was:$135.45 (RRP)Now:$97.90 (RRP)Price:$97.90 (RRP) -
Stock Code:CKWH-35A
We can convert stock ISO 135x10, 135x12 and 142x12 DH hubs 150x12 and 157x12
Call for stock and pricingPOA
