Surly
-
Stock Code:SLTR-BT0001
Note:Hitch sold separately
You are looking at our Ted trailer. It is 32” long and 24” wide. Ted is basically the same as our Bill trailer but shorter. It’s made of TIG-welded cro-moly steel for strength and long life. We’ve studied a lot of other trailers and thought about what we want out of a general purpose trailer. From it’s construction to all the details, we’re proud to offer you a trailer you can use for a long, long time to carry all kinds of stuff. When you don’t need it, it easily disconnects from your bike and when you’re ready to use it again it attaches just as quick and stays attached until you remove it.
We’ve added threaded mounting points for decking, corner stakes or for adding custom-built pieces. The wheels are strong, with stainless steel spokes and hardware, aluminum rims and durable, fast-rolling 16x1.95” tires.
Our hitch system is designed to be as universal as possible. This hitch will likely fit your bike. It works with full-suspension frames, disc brakes, rear racks and fenders. It adjusts to accommodate hub widths from 120 – 145mm and allows you to align the centerline of the trailer on the centerline of the bike. It will work with bikes that have wheels as small as 20" and as large as 29" while keeping the bed level with the ground. This is especially important when you are hauling long items that hang off the back of the trailer (lumber, tubing, ladders, etc.).
NOTE: the Bill and Ted hitch is sold separately. Remind your local shop to order hitch and the correct bed length.
Be sure to check out our selection of trailer accessories, all thoughtfully designed and quality made to help your stuff stay protected and secure.POA -
Stock Code:SLHB-HB2696
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain.
Back Sweep (deg): 34 deg
Bar Clamp Diameter (mm): 31.8 mm
Weight: 400 g
Lever Compatability: Mountain 22.2
Material: Aluminum
Rise: 40 mm
Width: 735 mmPOA -
Stock Code:SLHB-HB2695
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain.
Back Sweep (deg): 34 deg
Bar Clamp Diameter (mm): 31.8 mm
Weight: 400 g
Lever Compatability: Mountain 22.2
Material: Aluminum
Rise: 40 mm
Width: 735 mmPOA -
Stock Code:SLTR-BT0011
Replacement Stub Axle Assembly for Surly Bill and Ted Trailers.
- Washer and fixing bolt included
- Bolts are driveside and non-driveside specific
- Compatible only with Surly Bill and Ted TrailersPOA -
Stock Code:SLTR-BT0010
Replacement Stub Axle Assembly for Surly Bill and Ted Trailers.
- Washer and fixing bolt included
- Bolts are driveside and non-driveside specific
- Compatible only with Surly Bill and Ted TrailersPOA -
Stock Code:SLFK-FK0048
The Troll fork is just like the one that comes with the Troll frame.
Disc or rim brake compatible
Compatible with disc brakes and rack simultaneously
Fits 26" wheels with clearance for a 3.0" tire
Non-Suspension Corrected Length
Axle to Crown Length: 420 mm
Steerer Tube Length (mm): 310 mm
Rotor Size (Fork): 180POA -
Stock Code:SLHB-HB8277Stock Code:SLHB-HB8278Stock Code:SLHB-HB8279Stock Code:SLHB-HB0643Stock Code:SLHB-HB0644
Designed to combine what’s good about drop bars with the benefits of a riser, the Truck Stop Bar offers welcome relief to the road-weary traveler. Just like with a standard drop bar, you’ll have multiple hand positions at your disposal so you can stay comfortable and in control for the long haul down the Big Slab. And if it’s a more relaxed, upright riding position you’re after, 30mm of rise will get you there. So, if you’ve accidentally or intentionally cut your steer tube too short, here’s your chance at redemption. Also suitable for taller riders who’ve exhausted all other options for rise, it comes in three widths of 42, 45, and 48cm. Lightweight aluminum construction, CB radio not included.
Specifications:
Material: Aluminum
Clamp Diameter: 31.8mm
Width: 42cm, 45cm, or 48cm
Rise: 30mm
Sweep Angle: 12 degrees
Color: E.D. coated blackPOAPOAPOAPOAPOA -
Stock Code:SLXT-KI0010
The Trucker Kickstand Plate is designed to work only with Surly Long Haul and Disc Trucker touring frames. It allows use of any kickstand while protecting frame chainstays from damage.
POA -
Stock Code:SLXT-KI0011
The Disc Trucker Kickstand Plate is fine-tuned to work only with the redesigned Surly Disc Trucker touring frame (2020 and newer).
- Allows use of any kickstand while protecting chainstays from damage
- For legacy Disc Trucker and Long Haul Trucker frames, use the silver-colored Trucker Kickstand Plate (KI0010)POA -
Stock Code:SLCT-CH9992POA
-
Stock Code:SLCT-CH9994POA
-
Stock Code:SLCT-CH9999
We decided to design a chain tensioner that will keep that rear wheel static in our dropouts...and most other kinds of rear-facing horizontal dropouts. Plus, ours will open up a bottle o' brew. The body of the Tuggnut is investment cast in stainless steel for durability. It features a thumbscrew, for tool-free adjustments, and 2 axle holes for a wide range of fore/aft wheel positions. The Tuggnut comes with an aluminum adapter that reduces the axle hole from 10mm to 6mm, so you can use it with quick-release axles, in addition to nutted axles. We sell it as a single, because you really only need one...on the drive side. But, if you absolutely need one on the non-drive side of your rig, to achieve balance in your life, you are in luck...the bottle opener works either way.
$55.00 (RRP)POA -
Stock Code:SLRK-RK0109
We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black.
Load weight limit 30 lbs.
15 3/8" x 10"
Rack weight 650g
6061-TB Aluminum
Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack
Mounting Hardware Included$99.00 (RRP)POA -
Stock Code:SLWH-HU0812
· 6061-T6 forged hub shell (same as the Surly New); 6901 bearings
· Axle is quick release and bolt-on compatible
· Stainless 6mm bolts are included; quick release skewer is NOT included
· 4130 CroMoly axle and stainless cones; agressive knurling on cones and bolt caps for reduced slippage
· New axle/cone system uses uses a specific shouldered axle that allows the hubs to be completely adjustment free and simple to service
Front Hub Spacing (mm): 100 mm
Hub/Brake Compatibility: 6-Bolt Disc
Skewer Included: No
Spoke Type: J-BendPOA -
Stock Code:SLWH-HU0847
Surly Ultra New Disc 135mm Rear Hubs.
- 6061-T6 forged hub shell (same as the Surly New); 6901 bearings
- Axle is quick release and bolt-on compatible
- Stainless 6mm bolts are included; quick release skewer is NOT included
- 4130 CroMoly axle and stainless cones; agressive knurling on cones and bolt caps for reduced slippage
- New axle/cone system uses uses a specific shouldered axle that allows the hubs to be completely adjustment free and simple to servicePOA -
Stock Code:SLWH-HU0822
· 6061-T6 forged hub shell (same as the Surly New); 6901 bearings
· Axle is quick release and bolt-on compatible
· Stainless 6mm bolts are included; quick release skewer is NOT included
· 4130 CroMoly axle and stainless cones; agressive knurling on cones and bolt caps for reduced slippage
· New axle/cone system uses uses a specific shouldered axle that allows the hubs to be completely adjustment free and simple to servic
Front Axle Type: 9x1
Front Hub Spacing (mm): 100 mm
Hub/Brake Compatibility: 6-Bolt Disc
Skewer Included: No
Spoke Type: J-BendPOA -
Stock Code:SLWH-HU0835
Surly Ultra New Rear Hubs, Non-Disc.
Axle is quick release and bolt-on compatible
Stainless 6mm bolts are included; quick release skewer is NOT included
6061-T6 forged hub shell (same as the Surly New); 6901 bearings
4130 CroMoly axle and stainless cones; agressive knurling on cones and bolt caps for reduced slippage
New axle/cone system uses uses a specific shouldered axle that allows the hubs to be completely adjustment free and simple to service
Spoke Interface: J-Bend
Hub/Brake Compatibility: Rim Brake
Cassette Body Type: Threaded Standard 1.37" x 24tpi
Skewer Included: No
Rear Axle: 10x1 Threaded x 120mm
Weight: 310 g
Center to Flange, Right: 30
Center to Flange, Left: 31
Flange Diameter, Left: 54
Flange Diameter, Right: 54POA -
Stock Code:SLWH-HU0834
Surly Ultra New Rear Hubs, Non-Disc.
Axle is quick release and bolt-on compatible
Stainless 6mm bolts are included; quick release skewer is NOT included
6061-T6 forged hub shell (same as the Surly New); 6901 bearings
4130 CroMoly axle and stainless cones; agressive knurling on cones and bolt caps for reduced slippage
New axle/cone system uses uses a specific shouldered axle that allows the hubs to be completely adjustment free and simple to service
Spoke Interface: J-Bend
Hub/Brake Compatibility: Rim Brake
Cassette Body Type: Threaded Standard 1.37" x 24tpi
Skewer Included: No
Rear Axle: 10x1 Threaded x 120mm
Weight: 310 g
Center to Flange, Right: 30
Center to Flange, Left: 31
Flange Diameter, Left: 54
Flange Diameter, Right: 54POA -
Stock Code:SLWH-HU0836
Surly Ultra New Rear Hubs, Non-Disc.
Axle is quick release and bolt-on compatible
Stainless 6mm bolts are included; quick release skewer is NOT included
6061-T6 forged hub shell (same as the Surly New); 6901 bearings
4130 CroMoly axle and stainless cones; agressive knurling on cones and bolt caps for reduced slippage
New axle/cone system uses uses a specific shouldered axle that allows the hubs to be completely adjustment free and simple to service
Spoke Interface: J-Bend
Hub/Brake Compatibility: Rim Brake
Cassette Body Type: Threaded Standard 1.37" x 24tpi
Skewer Included: No
Rear Axle: 10x1 Threaded x 130mm
Weight: 337 g
Center to Flange, Right: 31.5
Center to Flange, Left: 33
Flange Diameter, Left: 54
Flange Diameter, Right: 54POA -
Stock Code:SLWH-HU0843
Surly Ultra New Rear Hubs, Non-Disc.
Axle is quick release and bolt-on compatible
Stainless 6mm bolts are included; quick release skewer is NOT included
6061-T6 forged hub shell (same as the Surly New); 6901 bearings
4130 CroMoly axle and stainless cones; agressive knurling on cones and bolt caps for reduced slippage
New axle/cone system uses uses a specific shouldered axle that allows the hubs to be completely adjustment free and simple to service
Spoke Interface: J-Bend
Hub/Brake Compatibility: Rim Brake
Cassette Body Type: Threaded Standard 1.37" x 24tpi
Skewer Included: No
Rear Axle: 10x1 Threaded x 135mm
Weight: 337 g
Center to Flange, Right: 38.5
Center to Flange, Left: 35
Flange Diameter, Left: 54
Flange Diameter, Right: 54POA -
Stock Code:SLWH-HU0811
Surly Ultra New Front Hubs, Non-Disc.
- 6061-T6 forged hub shell (same as the Surly New); 6901 bearings
- Axle is quick release and bolt-on compatible
- Stainless 6mm bolts are included; quick release skewer is NOT included
- 4130 CroMoly axle and stainless cones; agressive knurling on cones and bolt caps for reduced slippage
- Axle/cone system uses uses a specific shouldered axle that allows the hubs to be completely adjustment free and simple to servicePOA -
Stock Code:SLWH-HU0845
Surly Ultra New Disc Rear Hubs.
- 6061-T6 forged hub shell (same as the Surly New); 6901 bearings
- Axle is quick release and bolt-on compatible
- Stainless 6mm bolts are included; quick release skewer is NOT included
- 4130 CroMoly axle and stainless cones; agressive knurling on cones and bolt caps for reduced slippage
- New axle/cone system uses uses a specific shouldered axle that allows the hubs to be completely adjustment free and simple to servicePOA -
Stock Code:SLXT-RK0124
The Surly Whip Lash is designed for attaching bags, bivvies, and other sundries to your bicycle frame. Its trimmable design features nylon construction and a hook-and-loop style closure.
- For general tie-down use
- Rubberized side securely grips bike frames and racks
- Includes two 550mm lashes and one 695mm lashPOA
