Soma
-
Stock Code:SMHB278021
Riser bar with extra bend, but a low rise. Not as much bend as Soma's original Dream Riser, but enough so grips don't get in the way of large bar bags.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 25mm
– Backsweep: 20 degrees
– Upsweep: 5 degrees
– Weight: 425g$190.00 (RRP)Add To Cart
-
Stock Code:SMHB278022
Riser bar with extra bend, but a low rise. Not as much bend as Soma's original Dream Riser, but enough so grips don't get in the way of large bar bags.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 25mm
– Backsweep: 20 degrees
– Upsweep: 5 degrees
– Weight: 425g$190.00 (RRP)Add To Cart
-
Stock Code:SMHB278005
A roomy riser bar with about 25° of backsweep for a natural wrist position. Offers comfort without sacrificing hardly any control. Dream Cycle Vancouver helped us design this model. They wanted to replicate something close to bars found on MTB bikes of the early 80's. Recommended for bikepacking and touring.
– 6061 T6 aluminum
– 780mm width
– 50mm rise
– 31.8mm center
– 25° backsweep
– 5° upsweep
– 420 grams$220.00 (RRP) -
Stock Code:SMHB278006
A roomy riser bar with about 25° of backsweep for a natural wrist position. Offers comfort without sacrificing hardly any control. Dream Cycle Vancouver helped us design this model. They wanted to replicate something close to bars found on MTB bikes of the early 80's. Recommended for bikepacking and touring.
– 6061 T6 aluminum
– 780mm width
– 50mm rise
– 31.8mm center
– 25° backsweep
– 5° upsweep
– 420 grams$220.00 (RRP)Add To Cart
-
Stock Code:SMFD25437$11.26 (RRP)
-
Stock Code:SMFD25439$40.83 (RRP)
Add To Cart
-
Stock Code:SMRK18566Stock Code:SMRK18567
Turns your Porteur Rack into a shallow basket.
CrMo steel construction.
Hardware included.
.$74.97 (RRP)$100.33 (RRP) -
Stock Code:SMFD25445Stock Code:SMFD25447
Soma Rain Dog Fenders, Red
Full coverage traditional fenders utilizing conventional hardware.
Chromoplastic fenders, rubber mudflaps and stainless steel stays.$74.97 (RRP)$74.97 (RRP) -
Stock Code:SMFR900107Stock Code:SMFR900108Stock Code:SMFR900110Stock Code:SMFR900111
The Fog Cutter is an endurance road/road sport design. We designed it to fit fatter tires, but its geometry makes it handle like a road bike rather than CX or gravel bike. It can float you over chewed up asphalt better than most bikes in this category. This is the frame you want for grand fondos, long days in the saddle and the most demanding commutes.
Tange Prestige double butted CrMo steel tubing; heat treated throughout
• Road sport geometry
• Rear rack & fender mounts
• Tange Modular dropouts. Stock setup is for 142mm thru-axle hubs and flat mount disc brakes. Alternative styles available thru Tange/Long Shen.
• Fork options: Matching straight blade carbon fork (alloy steerer, flat mount, 12 x 100 thru-axle hub) or lugged CrMo steel fork (CrMo steerer, IS disc mount, QR hub)
• Tire clearance for 700c x38mm with fenders (some front derailleurs will limit tire clearance) and 650b x 42mm
• Fits 1-1/8" headset (EC34/28.6|EC34/30 headsets)
- 27.2mm post size$1,780.00 (RRP)$1,599.00 (RRP)$1,599.00 (RRP)$1,780.00 (RRP) -
Stock Code:SMFR91151Stock Code:SMFR91153
The Fog Cutter is an endurance road/road sport design. We designed it to fit fatter tires, but the frame angles are more road bike than CX or gravel bike. It can float you over chewed up asphalt better than most bikes in this category. This is the frame you want for long days in the saddle and the most demanding commutes.
- Tange Prestige double butted CrMo steel front triangle; butted CrMo on rear triangle; heat treated throughout
- Road sport geometry
- Rear rack & fender mounts
- International disc mounts (rear mount is located on the chainstay for stiffer performance and also keeps the caliper out of the way of rear racks)
- Available matching straight blade carbon fork w/ aluminum steerer
- Fits 700x38c tires with fenders - 1-1/8" size headtube
- 27.2mm post size
- 7 sizes: 48, 51, 54, 56, 58, 61 and 66cm
- Weight: 4.25 lbs (48cm); 4.5 lbs. (58cm) - Paint: Rosso Red (A full bodied red, but not "Ferrari" loud)
- Seat collar: 29.8 to 30mmWas:$1,780.00 (RRP)Now:$1,089.00 (RRP)Price:$1,089.00 (RRP)$1,780.00 (RRP) -
Stock Code:SMFR900107- FORK
The Fog Cutter is an endurance road/road sport design. We designed it to fit fatter tires, but its geometry makes it handle like a road bike rather than CX or gravel bike. It can float you over chewed up asphalt better than most bikes in this category. This is the frame you want for grand fondos, long days in the saddle and the most demanding commutes.
Tange Prestige double butted CrMo steel tubing; heat treated throughout
• Fork INCLUDED lugged CrMo steel fork (CrMo steerer, IS disc mount, QR hub)
• Road sport geometry
• Rear rack & fender mounts
• Tange Modular dropouts. Stock setup is for 142mm thru-axle hubs and flat mount disc brakes. Alternative styles available thru Tange/Long Shen.
• Tyre clearance for 700c x38mm with fenders (some front derailleurs will limit tire clearance) and 650b x 42mm
• Fits 1-1/8" headset (EC34/28.6|EC34/30 headsets)
- 27.2mm post size$2,000.00 (RRP)Add To Cart
-
Stock Code:SMFK231006
CrMo steel lugged fork for the Soma Fog Cutter frame.
– Sloping lugged crown
– Flat disc mount
– Mini rack bosses on fork leg
– Fender eyelets
– 12 x 100 thru-axle (1.5 TP)
– 1-1/8" 350mm long CrMo steerer
– Axle to crown: 400mm
– Rake: 48mm
– Fits tyres up to 700c x 42mm
– Cerulean BluePOA -
Stock Code:SMFK230118
Version 2 lugged crown fork for Soma Wolverine 4.1 B-Type.
• Tange Infinity CrMo steel
• Flat lugged crown
• Mini rack and low rider pannier rack mounts
• Brake compatibility: Flat mount disc
• Dual fender eyelets on dropouts
• Hub fit: QR
• Axle to Crown: 400mm
• Rake: 50mm
• Steerer: 1-1/8", 350mm long
• Paint: Lunar Rock$350.00 (RRP)Add To Cart
-
Stock Code:SMFK231910
A tough unicrown fork option for the Soma Wolverine and other gravel/CX frames with a 1-1/8" headtube. Version 3 model has a new fork end design and adopts the flat mount disc standard.
– Tange Infinity CrMo
– Unicrown straight blade
– 405mm axle to crown
– 50mm rake
– Fits flat mount disc (160mm/180mm only, does not fit 140mm. Use a 160mm adapter to reach 180mm rotors)
– Fits 700x45mm tires with fenders (this has slightly less clearance than the lugged crown fork)
– Triple bosses on fork leg to fit low rider pannier rack or cage
– 15 x 100mm thru-axle included
– Weight: 3.3 lbs (with uncut 350mm steerer and thru-axle bolts)$390.00 (RRP)Add To Cart
-
Stock Code:SMFK23280
This fork is only to be sold with Wolverine frames or as a replacement for a Wolverine. We don't stock enough for general sales. - Flat lugged crown
– Tange Infinity CrMo steel
– Flat lugged crown
– IS Disc mount
– Double eyelets at fork tips
– Mini rack mounts
– Low rider pannier mounts
– 50mm rake
– 400mm axle to crown$350.00 (RRP)Add To Cart
-
Stock Code:SMFK23281
For those who want a little more front end stiffness out of their Wolverine.
– Tange Infinity CrMo
– Unicrown straight blade
– 405mm axle to crown
– 50mm rake
– Fits 700x45mm tires with
fenders (this has slightly less
clearance than the lugged)
– Low rider pannier mounts
* 15mm TRU-AXLE INCLUDED$350.00 (RRP)Add To Cart
-
Stock Code:SMFK231909
A tough unicrown fork option for the Soma Wolverine and other gravel/CX frames with a 1-1/8" headtube. Version 3 model has a new fork end design and adopts the flat mount disc standard.
– Tange Infinity CrMo
– Unicrown straight blade
– 405mm axle to crown
– 50mm rake
– Fit flat mount disc (160mm rotor - with adapter)
– Fits 700x45mm tires with fenders (this has slightly less clearance than the lugged crown fork)
– Triple bosses on fork leg to fit low rider pannier rack or cage
– 15 x 100mm thru-axle included
– Weight: 3.3 lbs (with uncut 350mm steerer and thru-axle bolts)$390.00 (RRP)Add To Cart
-
Stock Code:SMXT20506
- Non-model specific Soma frame decals, factory quality.
- Die-cut vinyl
- In white and silver with black outlines, which should look good on almost any paint job light or dark.$39.00 (RRP)Add To Cart
-
Stock Code:SMFR900134Stock Code:SMFR900136Stock Code:SMFR900137Stock Code:SMFR900138Stock Code:SMFR900139
The Smoothie HP is the “high protein” version of our Smoothie road frame that was part of our line for almost 20 years.
Extra large diameter, thin-wall Tange Prestige chromoly coupled with modern touches like thru-axles and compact geometry give this frame increased power transfer and road feel while still delivering a composed and plush ride at all speeds. The re-designed geometry combines a comfortable higher stack with a shorter wheelbase that rewards skillful riders.
Frame Features:
- Tange Prestige heat-treated double butted CrMo steel
- Extra oversized down tube and chainstays for greater pedaling stiffness
- Ovalized top tube for increased lateral stiffness and vertical compliance
- Size specific tubing (Larger diameter down tubes on the larger sizes)
- Comfortable high stack matched with a tighter wheelbase than the typical big brand endurance road frame
- Replaceable modular dropouts (12 x 142mm bolt-on thru-axle, fits flat mount disc brake)
- BSA Threaded bottom bracket shell
- Rear rack/fender mounts
- Max tire size: 700x32c with fenders
- Two water bottle boss sets
- 6 sizes: 48, 52, 54, 56, 58, 60
Fork Features:
- Carbon Fiber
- 43mm rake (48mm on size 48 and 52cm)
- Fits 700x32 tires with fenders
- 12 x 100mm QR thru-axle, flat mount brake compatible
- Tapered alloy steerer
- Internal cable routing$2,400.00 (RRP)$2,400.00 (RRP)$2,400.00 (RRP)$2,400.00 (RRP)$2,400.00 (RRP) -
Stock Code:SMFR900126Stock Code:SMFR900127Stock Code:SMFR900128Stock Code:SMFR900129Stock Code:SMFR900131
The Grand Randonneur is a road frame optimized to carry a front load. We have equipped it with rear rack mounts, but it feels best with a front load only. The version 3 of the "Grando" makes quite a few updates.
• The geometry is still low trail in the front, but we have tried to make the handling slightly more stable than version 1 and 2.
• We have tweaked the tubing mix to add stiffness at the bottom bracket, while keeping this frame our lightest model.
• We have modernized parts of it: Adding IS disc mounts and thru-axle hubs compatibility. And of course everyone wants just slightly more tire clearance.
• With its skinny steel tubes and 1" threaded lugged crown fork it still has the vintage road bike look.
• Tange Prestige CrMo tubes, double-butted
• Threaded 1" lugged crown fork is equipped with low rider pannier bosses, mini rack eyelets and double eyelets at the dropouts. Thru-axle hub compatible. IS disc mounts
• Designed for 650b wheels
• Max. tire fit: 650 x 47mm semi-knob tire
(Max. fender width: 50mm)
• Modular rear dropouts: Stock set up is for 142mm x 12mm thru-axle with IS disc mounts.
• Rear rack and fender eyelets
• Pump peg at headtube
• 3 sets of water bosses
• Headset type: 1" ISO Threaded external cups(EC30/25.4|EC30/26) (Needle/Roller bearings recommended)
• Seatpost fit: 27.2mm
• Weight: Frame: 4.25 lbs Fork: 2.35 lbsPOAPOA$2,125.00 (RRP)POAPOA -
Stock Code:SMRR45513Stock Code:SMRR45515
Tires for the randonneuring enthusiasts. Super supple and smooth rolling. Lightweight.
- 650b x 42mm
- High performance tubular style casing
- Slick tread pattern
- Skin/beige sidewall
- 300 grams
- 90 TPI
Made in Japan by Panaracer.$151.04 (RRP)$151.04 (RRP) -
Stock Code:SMHB27544Stock Code:SMHB27548Stock Code:SMHB27556Stock Code:SMHB27527Stock Code:SMHB27540Stock Code:SMHB27541Stock Code:SMHB27546Stock Code:SMHB27549Stock Code:SMHB27550Stock Code:SMHB27553Stock Code:SMHB27554Stock Code:SMHB27524Stock Code:SMHB27525
Road bar with a round compact bend and shallow drop. Shape makes it easy to get into a natural position in the drops and brake levers are within easy reach.
- 6061-T6 aluminum
- Drop: 130mm
- Reach: 75mm$143.33 (RRP)$143.33 (RRP)$143.33 (RRP)$143.33 (RRP)$143.33 (RRP)$143.33 (RRP)$143.33 (RRP)$143.33 (RRP)$143.33 (RRP)$143.33 (RRP)$143.33 (RRP)$143.33 (RRP)$143.33 (RRP) -
Stock Code:SMHB280123Stock Code:SMHB280124Stock Code:SMHB280125
We have added adjustable extensions to our Hwy One compact drop road handle bar. Designed mainly as additional hand position on long road or gravel riding. The clamps and extensions are not fixed, so you can rotate the extensions into different positions.
- 6061-T6 aluminum
- Drop: 130mm
- Reach: 75mm
- 31.8mm center
- Single groove$360.00 (RRP)$360.00 (RRP)$360.00 (RRP) -
Stock Code:SMFR900144Stock Code:SMFR900145Stock Code:SMFR900146Stock Code:SMFR900147Stock Code:SMFR900148Stock Code:SMFR900149Stock Code:SMFR900150
The Jawbone A-Type frame is the perfect platform to build drop bar mountain touring and bike packing rig.
While it is still game for riding gravel and singletrack, it is in its element when packed up for your next adventure.
- Tange Prestige heat-treated butted CrMo steel; butted CrMo rear end
- Flat mount disc brake tabs on rear
- Investment cast vertical dropout with replaceable stainless steel hanger. 12 x 142mm thru-axle
- Front derailleur compatible (bottom pull)
- Rear rack and fender eyelets
- Two sets of bottle cage bosses; one set of cargo cage bosses on downtube
- 44mm headtube: Fits 1-1/8" steerer tubes and tapered steerer tubes with a headset swap
- 27.2mm post size/28.6mm frt. der. size/29.8mm seat collar, 73mm bottom bracket (English threads)
- Tyre Width Range: 27.5 x 47mm to 2.5” / 700c x 38mm to 29 x 2.25”
- Color: Sage Green
- Sizes: 650b only: 50cm, 52cm / 700c: 54cm, 56cm, 58cm, 61cm, 64cm
Optional Fork Features:
- Tange CrMo steel
- Steve Potts lugged construction
- Axle to Crown: 420mm
- Rake: 50mm
- Investment cast thru-axle dropouts (12mm x 100mm)
- One set of cargo cage bosses per leg, lowest boss can be used for a pannier rack
- IS disc mount$1,599.00 (RRP)$1,599.00 (RRP)$1,599.00 (RRP)$1,599.00 (RRP)$1,599.00 (RRP)$1,599.00 (RRP)$1,599.00 (RRP)
