Wheels Manufacturing
-
Stock Code:WMBB-BB-MTB-3
Wheels Manufacturing standard outboard bottom bracket features Enduro ABEC 5 Angular Contact sealed bearings. Compatible with 24mm (Shimano, FSA, Etc.) cranks. Fully serviceable.
In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.
Weight: 98g
Road (68mm Shell width) - Grey anodized, machined aluminum cups
Mountain (73mm Shell width) - Black or Red anodized, machined aluminum cups
Enduro ABEC 5 Angular Contact sealed bearings
Dual silicone seal keeps the contamination out for longer life
Will accept current 24mm spindle (Shimano, FSA, Etc.) cranks$223.00 (RRP)Add To Cart
-
Stock Code:WMBB-BB-MTB-9
Wheels Manufacturing’s standard outboard bottom bracket features Enduro ABEC 5 angular contact bearings. Compatible with 24/22mm (SRAM, Truvativ) cranks.
In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.
Weight: 98g
Road (68mm Shell width) - Grey anodized, machined aluminum cups
Mountain (73mm Shell width) - Black or Red anodized, machined aluminum cups
Enduro ABEC 5 Angular Contact sealed bearings
Dual silicone seal keeps the contamination out for longer life
Will accept current 24/22mm spindle (SRAM, Truvativ) cranks$223.00 (RRP)Add To Cart
-
Stock Code:WMBB-ORING42X44X2Z
Replacement o-rings for Wheels Mfg PressFit 30 (PF30) and PF30-OUT & BB30-OUT bottom brackets. This is the larger o-ring that sits on the larger section of each cup nearest the outer flange.
42mm x 44mm x 2mm
2 o-rings per bag$3.50 (RRP)Add To Cart
-
Stock Code:WMPA-PED-WASHStock Code:WMPA-PED-WASH-10Stock Code:WMPA-PED-WASH-20
Wheels MFG Pedal Washer 1 pair
Stainless steel washers for fitting pedals to carbon fiber cranks
•1.2mm thickness
•Sold Individually, Bag of 2, Bag of 10, or Bag of 20$9.00 (RRP)$34.00 (RRP)$58.00 (RRP) -
Stock Code:WMBB-PF30-OUT-29MMStock Code:WMBB-PF30-OUT-29MM-3
By popular demand, we've added this PF30 with outboard bearing BB for use with 29mm spindle SRAM DUB cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Bearings: Enduro ABEC-3
Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB*
Bottom Bracket Shell Width: 61mm* to 73mm
Bottom Bracket Shell I.D.: 46mm
Over Bearing Width: 89mm in 68mm wide shell
Crank Spindle Diameter: 29mm
Tool Pattern: 48.5mm x 16 notch$221.00 (RRP)$221.00 (RRP) -
Stock Code:WMBB-PF30-6061-SEAL
Outer seal for Wheels Mfg PressFit 30 bottom bracket.
Fits:
PF30-BB
PF30-BB-AC
PF30-BB-CER
* Sold individual$14.90 (RRP)Add To Cart
-
Stock Code:WMBB-PF30-CAMP
A new solution for adapting Campagnolo Ultra-Torque cranks to Pressfit 30-standard frames
This adapter fits over the installed crank bearing so no bearing removal is required for installation
Simply tap the cranks with mounted adapters into the 6806 bearing in the Pressfit 30 BB. Note: Note: The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.
Tighten cranks to Campagnolo specifications.
Not compatibale with 386EVO and BBRight frames$89.95 (RRP)Add To Cart
-
Stock Code:WMBB-PF30-THD-AC
New PF30 bottom bracket with threaded cups. Don't rely on questionable frame tolerances. Our threaded cups ensure a tight, noise-free bottom bracket with proper bearing alignment.
In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.
Direct replacement for SRAM, FSA, and other PressFit 30 bottom brackets!
Made in the USA
Anodized black, machined aluminum shell
6806 (30mm ID) Enduro Angular Contact bearings
Dual silicone seals keep the contamination out for longer life
Adaptable BB to fit PressFit 30 specific frames (46mm ID) with shell widths from 61mm to 86.5mm
Will accept current 30mm spindle cranksets, as well as 24mm and 24/22mm cranksets using Wheels Mfg. adapter shims
Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).$258.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30-THD-BB
New PF30 bottom bracket with threaded cups. Don't rely on questionable frame tolerances. Our threaded cups ensure a tight, noise-free bottom bracket with proper bearing alignment.
Direct replacement for SRAM, FSA, and other PressFit 30 bottom brackets!
- Bearings: Enduro ABEC-3
- Bottom Bracket/Frame Interface: PF30, BBRight™ Press Fit, Specialized Carbon OSBB*
- Bottom Bracket Shell Width (mm): 61mm to 79mm*
- Bottom Bracket Shell I.D.: 46mm
- Crank Spindle Diameter: 30mm
- Will accept 24mm and 24/22mm cranksets using Wheels Mfg. adapter shims
* Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers.
** Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).$228.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30-THD-CERZER
New PF30 bottom bracket with threaded cups. Don't rely on questionable frame tolerances. Our threaded cups ensure a tight, noise-free bottom bracket with proper bearing alignment.
Direct replacement for SRAM, FSA, and other PressFit 30 bottom brackets!
Made in the USA
Anodized black, machined aluminum shell
6806 (30mm ID) Enduro ABEC 5 "ZERØ" Ceramic Hybrid bearings
Dual silicone seals keep the contamination out for longer life
Adaptable BB to fit PressFit 30 specific frames (46mm ID) with shell widths from 61mm to 86.5mm
Will accept current 30mm spindle cranksets, as well as 24mm and 24/22mm cranksets using Wheels Mfg. adapter shims
Packaged for retail display
Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).$445.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30-OUT-30MMAC
By popular demand, we've added this PF30 with outboard bearing BB for use with 30mm spindle cranksets when used in PF30 frames. A great choice for use with RaceFace Cinch cranks. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.
** Note: Spindle length must be 103mm or longer when used in a 68mm wide shell, 108mm or longer when used in a 73mm wide shell.
Bearings: Enduro Angular contact
Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB*
Bottom Bracket Shell Width: 61mm* to 83mm
Bottom Bracket Shell I.D.: 46mm
Over Bearing Width: 89mm in 68mm wide shell
Crank Spindle Diameter: 30mm
Tool Pattern: 48.5mm x 16 notch
* Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers.$230.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30-OUT-3
Wheels Manufacturing’s new PressFit 30 to Outboard bottom bracket with Enduro ABEC 5 angular contact bearings is designed for installing 24mm (Shimano, FSA, Etc.) cranks into PF30 frames without the need for any adapters.
In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.
Weight: 153g
Made in the USA
Choose from Black or Red anodized machined aluminum cups
Enduro ABEC 5 angular contact sealed bearings
Dual silicone seal keeps the contamination out for longer life
Will accept current 24mm (Shimano, FSA, Etc.) cranks
Bottom Bracket Shell Width (mm): 68mm - 73mm
Bottom Bracket Shell I.D.: 46mm$230.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30-OUT-9
Wheels Manufacturing’s new PressFit 30 to Outboard bottom bracket with Enduro ABEC 5 angular contact bearings is designed for installing 24/22mm (SRAM, Truvativ, Etc.) cranks into PF30 frames without the need for any adapters.
Weight: 153g
Made in the USA
Choose from Black or Red anodized machined aluminum cups
Enduro ABEC 5 angular contact sealed bearings
Dual silicone seal keeps the contamination out for longer life
Will accept current 24/22mm (SRAM, Truvativ, Etc.) cranks
Bottom Bracket Shell Width (mm): 68mm - 73mm
Bottom Bracket Shell I.D.: 46mm$230.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30BB-PRX
PF30 bottom bracket with outboard bearings for use with M30 28/30mm spindle Praxis - comptiable cranksets. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Note: Spindle length must be 103mm or longer when used in a 68mm wide shell, 108mm or longer when used in a 73mm wide shell.
Bottom Bracket Shell I.D.: 46mm
Over Bearing Width: 89mm in 68mm wide shell
Crank Spindle Diameter: 28/300mm
Tool Pattern: 48.5mm x 16 notch$216.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30-OUT-30MM
By popular demand, we've added this PF30 with outboard bearing BB for use with 30mm spindle cranksets when used in PF30 frames. A great choice for use with RaceFace Cinch cranks. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
** Note: Spindle length must be 103mm or longer when used in a 68mm wide shell, 108mm or longer when used in a 73mm wide shell.
Bearings: Enduro ABEC-3
Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB*
Bottom Bracket Shell Width: 61mm* to 83mm
Bottom Bracket Shell I.D.: 46mm
Over Bearing Width: 89mm in 68mm wide shell
Crank Spindle Diameter: 30mm
Tool Pattern: 48.5mm x 16 notch
* Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers.$216.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30-OUT-1
Wheels Manufacturing’s new PressFit 30 to Outboard bottom bracket is designed for installing 24mm (Shimano, FSA, Etc.) cranks into PF30 frames without the need for any adapters.
Weight: 153g
Made in the USA
Choose from Black or Red anodized machined aluminum cups
Enduro ABEC 3 sealed bearings
Dual silicone seal keeps the contamination out for longer life
Will accept current 24mm (Shimano, FSA, Etc.) cranks
Bottom Bracket Shell Width (mm): 68mm - 73mm
Bottom Bracket Shell I.D.: 46mm$216.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30-OUT-7
Wheels Manufacturing’s new PressFit 30 to Outboard bottom bracket is designed for installing 24/22mm (SRAM, Truvativ, Etc.) cranks into PF30 frames without the need for any adapters.
Weight: 153g
Made in the USA
Choose from Black or Red anodized machined aluminum cups
Enduro ABEC 3 sealed bearings
Dual silicone seal keeps the contamination out for longer life
Will accept current 24/22mm (SRAM, Truvativ, Etc.) cranks
Bottom Bracket Shell Width (mm): 68mm - 73mm
Bottom Bracket Shell I.D.: 46mm$216.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30-OUT-5
Wheels Manufacturing’s new PressFit 30 to Outboard bottom bracket with Enduro Ceramic Hybrid bearings is designed for installing 24mm (Shimano, FSA, Etc.) cranks into PF30 frames without the need for any adapters.
Weight: 153g
Made in the USA
Choose from Black or Red anodized machined aluminum cups
Enduro Ceramic Hybrid sealed bearings
Dual silicone seal keeps the contamination out for longer life
Will accept current 24mm (Shimano, FSA, Etc.) cranks
Bottom Bracket Shell Width (mm): 68mm - 73mm
Bottom Bracket Shell I.D.: 46mm$294.00 (RRP) -
Stock Code:WMBB-PF30-OUT-11
Wheels Manufacturing’s new PressFit 30 to Outboard bottom bracket with Enduro Ceramic Hybrid bearings is designed for installing 24/22mm (SRAM, Truvativ, Etc.) cranks into PF30 frames without the need for any adapters.
Weight: 153g
Made in the USA
Choose from Black or Red anodized machined aluminum cups
Enduro Ceramic Hybrid sealed bearings
Dual silicone seal keeps the contamination out for longer life
Will accept current 24/22mm (SRAM, Truvativ, Etc.) cranks
Bottom Bracket Shell Width (mm): 68mm - 73mm
Bottom Bracket Shell I.D.: 46mm$294.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30A-OUT-29MM
The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Specifically designed for installing SRAM DUB Compatible cranks in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
1 - 2.5mm crank spindle spacer$228.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30A-OUT-SHIM
The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Specifically designed for installing 24.00mm spindle diameter cranks (Shimano, Etc.) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters.
**Note: FSA MegaExo spindles can be between 24.00mm and 24.07mm in diameter. If your FSA spindle is 24.07mm, this BB will not work! Please purchase our FSA 24.07x37 ceramic hybrid bearings separately. **
- Bottom Bracket/Frame Interface: Cannondale PF30A
- Bottom Bracket Shell Width (mm): 73mm
- Bottom Bracket Shell I.D.: 46mm
- Crank Spindle Diameter: 24.00mm
- Tool Pattern: 44mm x 16 notch$228.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30A-OUT-SRAM
The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Specifically designed for installing 22mm / 24mm spindle diameter cranks (SRAM / Truvativ GXP) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters.
- Bottom Bracket/Frame Interface: Cannondale PF30A
- Bottom Bracket Shell Width (mm): 73mm
- Bottom Bracket Shell I.D.: 46mm
- Crank Spindle Diameter: 22/24mm
- Tool Pattern: 44mm x 16 notch$228.00 (RRP)Add To Cart
-
Stock Code:WMBB-BB86-FAT-AC
PRESSFIT 41MM ANGULAR CONTACT FAT BIKE BB FOR 24MM (SHIMANO) CRANKS - BLACK
BB86 threaded BB for Fat Bike PF41.
Machined cups thread together for stability, increased bearing life, and simple installation and maintenance.
No more creaking. Smooth operation. Fast bearing replacement.
This is a fat bike bottom bracket! Your frame must have a 41mm inner diameter bottom bracket shell, with a width of 121mm or 132mm.
Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).$216.00 (RRP)Add To Cart